Water is an integral part of our lives. From drinking to washing and cooking to bathing, we need water for several activities in our life. This is why it helps to ensure that you get clean and safe water. However, the quality of water depends a lot on geography too. Certain areas are mineral-rich and hence the water in such regions will have a lot of harmful minerals and contaminants.
Reverse osmosis system that undertakes intensive purging of pollutants and contaminants in water and gives you clean and clear water is the perfect solution in such cases. Read on to learn more about an RO system so you can make an informed decision.
What is Reverse Osmosis?
Reverse Osmosis is the opposite of the naturally occurring process of osmosis. In Reverse Osmosis drinking system, water is pushed through a semi-permeable membrane using energy from a high concentration solution to a low concentration solution. The membrane has tiny perforations that allow only molecules that are the size of water molecules to pass through. This helps to remove all kinds of impurities, leaving the water clean and clear of impurities.
Components of an RO System
An RO drinking system follows a 4-step method to purify water. Here is how an RO filter cleans water of pollutants:
- Pre-Filtration
This is the first step and it removes the bigger particles or sediments that could potentially cause damage to the reverse osmosis water filter. This step also rids the water of chlorine.
- Reverse Osmosis Membrane
This is an important step. The water is pushed through a semi-permeable membrane that eliminates dissolved solids, pesticides, lead, copper, etc. Only water passes through the membrane and filtered particles are discarded.
- Post Filtration
After the reverse osmosis membrane filtration, the water is passed through a filter once more to trap any particles that could have escaped. This purified water is then stored in a tank.
- Polishing
Finally, before the water reaches your faucet, the filtered water is passed through activated charcoal to remove unwanted odors and flavors.
The water that reaches your faucet after all these procedures is the cleanest form that you can use for a variety of purposes, including consumption.
What Do I Need to Do to Keep My RO in Good Working Condition?
The best way to keep your reverse osmosis water filter in good working condition is to get it serviced at regular intervals. There are two main things that you need to be mindful of – the replacement of filters and annual maintenance.
While the pre-filter and post-filter of the reverse osmosis water purifier need to be replaced once a year, you will have to get the RO membrane replaced every two or three years.
You can get a technician to check your reverse osmosis water purifier once a year as a part of the annual maintenance.
Do you need help figuring out which RO system will work for you? Or are you struggling to figure out the maintenance plan for your system? Reach out to us for help!
Let Us Help You Get the Right RO System for Your Home!
Peninsula Water offers a host of products and services for water filtration. You can speak to our experts by calling us at (410) 341-6500 or write to us at service@peninsulawater.com regarding all your queries on reverse osmosis systems or water filtration in Maryland.
Also Read:
No Comments